Hi Performance Props & Products

Large diameter and blade area high rake progressive pitch propeller gives bow lift, excellent accleration and top end speeds 4.3/4" Gearcase, including hub Learn More

Delivers excellent hole shot great midrange and superb handling at top end speed with added bow and stern lift. Heat treated stainless steel suitable for 4.1/4" and 4.3/4" gearcases (semi overhub exhaust on 4 3/4" Gearcase), including hub kit Learn More

This strong & durable lightweight transom jack is easy to install & requires minimal maintenace. The jack will lift up to 300hp engines in 7 seconds to its full height even with the engine running at full power. The maximum lift above standard transom is 7.1/2" (1.1/2" built in & 6" rise). This extra height enables the boater to use surface piercing & specialist propellers which can increase speed & performance capabilites. Manufactuered from aluminium & stainless steel. Complete kit supplied which includes jack plate, controls, pump, switch, hoses, instructions & oil Learn More

This strong & durable lightweight transom jack is easy to install & requires minimal maintenace. The jack will lift up to 300hp engines in 7 seconds to its full height even with the engine running at full power. The maximum lift above standard transom is 7.1/2" (1.1/2" built in & 6" rise). This extra height enables the boater to use surface piercing & specialist propellers which can increase speed & performance capabilites. Manufactuered from aluminium & stainless steel. Complete kit supplied which includes jack plate, controls, pump, switch, hoses, instructions & oil Learn More

This strong & durable heavy duty transom jack is easy to install & requires minimal maintenace. The jack will lift up to 350hp+ engines in 7 seconds to its full height even with the engine running at full power. The maximum lift above standard transom is 7.1/2" (1.1/2" built in & 6" rise). This extra height enables the boater to use surface piercing & specialist propellers which can increase speed & performance capabilites. Manufactuered from aluminium & stainless steel. Complete kit supplied which includes jack plate, controls, pump, switch, hoses, instructions & oil Learn More

Designed to be used with the above transom jacks, electronic sensor reads every 1/4" rise and lights a corresponding LED Learn More

designed to straighten out the high speed steering pull that high pitched propellers produce when running at high transom settings Learn More

High water flow capacity allows surface piercing props (choppers, cleaver styles) to be run at maximum height for top speed and all out performance, while maintaining proper cooling to engine. High cooling capacity due to five inlet design to maintain proper water pressure
Nose cone kit contains all hardare for complete installation including casting, expoxy, and dual hose fittings Learn More

Water pressure gauge WPSI Learn More